• This is arguably the best wakeboard tower speaker package available at any price
• Designed by a speaker enclosure manufacturer with over 20 years of enclosure design experience (Bazooka)
• Utilize true marine-grade speakers designed for use in the harsh marine environment
• Tuned and ported speaker cabinet offers greater output and frequency response than other "tubbies"
• White High gloss cabinet finish
• Water Resistant Enclosure
• Waterproof Mid Range and Tweeter
• Composite Grill and Basket
• Salt, Fog, and UV Certified
• Various Mounting Clamps Available Separately
• Platinum 5-Way Binding Posts accept bare wire, pin connectors, spade lugs, banana plugs, and dual banana plugs
• To mount on wakeboard tower, use MTCL250SS (Universal) or MT-CLMAL-SS (For Malibu boats) - (both sold seperately)
• Sold in PAIRS

Specifications:

• Speaker Size: 8", 2-way
• Color: High Gloss White
• 1" Tweeters
• Sensitivity 92 dB
• 12 dB Per Octave Two Stage Crossovers, Bi-Ampable
• Frequency Response: 40Hz-20kHz
• RMS Power Handling: 100 watts
• Peak Power Handling: 200 watts
• Impedance: 4 ohms

• This is arguably the best wakeboard tower speaker package available at any price
• Designed by a speaker enclosure manufacturer with over 20 years of enclosure design experience (Bazooka)
• Utilize true marine-grade speakers designed for use in the harsh marine environment
• Tuned and ported speaker cabinet offers greater output and frequency response than other "tubbies"
• White High gloss cabinet finish
• Water Resistant Enclosure
• Waterproof Mid Range and Tweeter
• Composite Grill and Basket
• Salt, Fog, and UV Certified
• Various Mounting Clamps Available Separately
• Platinum 5-Way Binding Posts accept bare wire, pin connectors, spade lugs, banana plugs, and dual banana plugs
• To mount on wakeboard tower, use MTCL250SS (Universal) or MT-CLMAL-SS (For Malibu boats) - (both sold seperately)
• Sold in PAIRS

Specifications:

• Speaker Size: One 8" and One 5.25" (both 2-way full-range speakers)
• Color: High Gloss White
• 1" & 3/4" Tweeters
• Sensitivity 94 dB
• 12 dB Per Octave Two Stage Crossovers, Bi-Ampable
• Frequency Response: 55Hz-22kHz
• RMS Power Handling: 100 watts
• Peak Power Handling: 225 watts
• Impedance: 4 ohms

Originally developed for the Marine Wakeboard enthusiasts, this Bazooka MPA1000 PA system is a combination of a preamp and microphone system that adds tons of features to any system with amplifiers, and can be used in Marine and Automotive environments. You can hook multiple music sources into one compact console, and it includes a microphone that turns your boat's tower speakers into a PA system. Designed with RCA inputs and outputs, integration is simple into nearly any automotive audio system.

The mixer features inputs for 3 components: front and rear stereo inputs for your boat's CD player, a minijack input for your iPod® or portable MP3 player, and a mic input for the included microphone. Installation: Connect the mixer to your boat's amplified speaker system, and you'll be able to switch between music from 2 different sources, and can turn on the microphone to communicate with skiers, wakeboarders, or other boats (or the people in your vehicle or RV).

Features:

• Marine mixer
• Microphone with coiled cable
• Built-in source selectors
• 4-channel music input (FL/FR/RL/RR)
• Two sets of preamp outputs connect to your boat's amplifier
• 3.5mm Auxiliary MP3 Mini jack input in front
• Automatic input selected when auxiliary input is detected
• Auto memorize music and voice volume settings when status changers
• Microphone voice input
• Separate music and voice volume controls
• Mute or mix music with voice-over functionality
• Color: Black
• The MPA1000B PA system is compatible with any amplified audio system

Note: This product is also available in White (MPA1000W)

Precision Power PPI A.12SQ Features:

• Non pressed paper cone ensure maximum woofer efficiency
• Injection-Molded Polypropylene/Mica Dust Cap
• Rubber Gasket
• 4 Layer Voice Coil
• Kapton VC Former
• Conex spider provides clean and balanced sound quality
• Reinforced foam surround absorbs distortions
• Vented pole piece provides additional cooling of the motor
• Gold plated compression terminals

Precision Power PPI A.12SQ Specifications:

• 12" Dual 2 Ohm Art Collection Series Subwoofer
• RMS Power Handling: 300 watts
• Impedance: Dual 2 ohms
• 2.5" 4 layer voice coil
• Mounting depth: 5.5"
• Sensitivity: 86 dB
• 1-year warranty

The PC components come in 2-way and 3-way models with all individual drivers using rare-earth Neodymium motors for high BL, light weight and compact size. Traditionally only tweeters use Neo motors, but PPI used Neo on the 2.5” midrange and 6.5” midbass as well making the drivers very strong and compact. The 6.5” uses a Kevlar composite paper cone with laminated foam backing. Paper cones traditionally yield the most natural, uncolored sound reproduction possible. PPI embedded Kevlar fibers into the paper for rigidity which reduces cone flexing and radiated distortion. The 2.5” midrange features an aluminum cone for lightweight and strength while the tweeter uses a 20mm inverted aluminum diaphragm. The shallow depth of the midrange allows it to mount with the tweeter on the dash, or in the A-pillar, for phenomenal staging, rather than being limited to using a 4” midrange with the tweeter and being forced, in most cases, to fabricate kickpanel pods.

The crossover, thought by many to be the most important part of any component set, are truly phenomenal. There is one model that is used for both 2-way and 3-way sets. In two way mode the crossover sends a high-pass signal to the tweeters at 4kHz, away from the sensitive and critical 1kHz point. The low-pass signal goes to the 6.5” midbass and is also limited to 4kHz and down. When the switch is flipped for 3-way applications, the 4kHz low-pass couples with a 400Hz high-pass for the 2.5” midrange band. The previously empty midbass terminals now send a low-pas signal at 400Hz to the 6.5” midbass. The
crossovers use top quality inductors and capacitors. The tweeter circuit includes both a bulb and PTC switching capacitor for unparalleled protection.

PPI spared no expense for any part during the engineering process! Top quality everything = top quality performance.

6.5” Midbass Features:

• High Strength Neodymium Motor
• Kevlar Reinforced Paper Cone with Laminated Foam Backing
• Solid Phase Plug
• Low Resonance Polyphenylene Sulfide Basket
• Conex Spider with Stitched Tinsel Leads
• Butyl Rubber Surround
• CCAW 2” Voice Coil
• Glass Fiber VC Former

2.5” Midrange Features:

• High Strength Neodymium Motor
• Aluminum Cone
• Aluminum Dust Cap
• Low Resonance Polyphenylene Sulfide Basket
• Conex Spider Inverted Butyl Rubber Surround
• CCAW 1” Voice Coil
• Aluminum VC Former with cooling vents

20mm Tweeter Features:

• High Strength Neodymium Motor
• Inverted and Dimpled Aluminum Diaphragm
• CCAW 20mm Voice Coil
• Kapton VC Former

Precision Power PPI PC3.65C Specifications:

• 6-1/2" Power Class Series 3-Way Car Component System
• Power Handling: RMS: 200 watts per set / 100 watts each side
• External crossover networks designed for 3-way component systems
• 3 ohms impedance
• Woofer Mounting Depth: 2.625"
• Midrange Mounting Depth: 1.75"
• Tweeter Mounting Depth: .625"
• Also available in a 2-Way Component System
• 1-year warranty
• grills included
• Frequency Response: 60-20kHz
• Efficiency: 87dB
• Priced Per Complete Component System: 2 midbasses, 2 midranges, 2 tweeters and 2 crossover networks

• 7-channels
• wireless
• Select a channel with the On Screen Display
• Only works with the APKT-70-COL, AHG37L, & AHG37R 7" headrest screens

• Power Side Noise Filter
• 3 Sec. Delay (5A max)
• Eliminates Engine-Related Noise

• Classic Series Slant single-driver enclosure designed for hatchbacks or trunks
• Gray automotive-grade carpeting
• Built with 5/8" MDF (Medium Density Fiberboard)
• Platinum Spring-Loaded Terminals (10 AWG Wire)
• Internal Volume: 1.35 cubic feet
• Dimensions: 16-3/4" W x 13-1/4" H x 12-7/16" TopDepth x 15-1/4" BottomDepth

Audio Enhancers Information:

Audio Enhancers aims to “Build a great box through excellent Craftsmanship, Quality and Unsurpassed Customer Service.“ As the leader in the automotive speaker cabinet industry, Audio Enhancers has been building a comprehensive selection of Competition-Grade, Award-Winning speaker enclosures for decades.

Audio Enhancers utilizes the latest technology in the wood working industry. Using CAD/CAM/CNC assures precise parts to 0.002 of an inch, time after time. Audio Enhancers sets the bench mark for quality, offering only American-made products that meet their rigorous standards. These enclosures utilize superior materials and workmanship which aid in delivering consistently high quality boxes. Expertly crafted and acoustically correct; these speaker cabinets help deliver unparalleled sound quality.

Audio Enhancers enclosures are backed by a solid, companywide commitment to provide unsurpassed customer service. They’re so certain their products will please, that every custom-made speaker cabinet they build features a 100%-satisfaction guarantee.

You'll find that these enclosures offer the highest value on the market for a quality product.

System Features:

• Midrange: 4"
• Power Handling: 90 Watts RMS
• Frequency Responce: 70-20kHz
• Sensitivity: 91.0 dB
• 4 ohms
• Mounting Depth: 2.1"

Link to Detailed Specifications of the 6.5" Mid-bass driver:
http://cdtaudio.com/pdf/ES-400.pdf

Design Features:

1. Variable Crossover – The amplifiers have a built-in 24dB/octave Butterworth filter with a crossover point variable from 40Hz to 250Hz. The crossover is set to Low-Pass (LP).
2. Protect LED – The (red) LED illuminates when the unit is latched into protection. It requires momentary AP removal to enable output PWM.
3. Gain Control – The input gain control is preset to match the output of most source units. It can be adjusted to match output levels from a variety of source units.
4. Phase – Used when connecting two bd amplifiers together to phase one amplifier 180° from the other.
5. Infrasonic Filter – A high pass filter designed to prevent frequencies below the audio range from being applied to the subwoofer from the amplifier. Consequently, improving subwoofer performance and power handling.
6. LED Power Indicator – The LED illuminates when the unit is turned on.
7. Cast Aluminum Heatsink – The cast aluminum heatsink of the amplifier dissipates heat generated by the amplifier's circuitry. The inherent advantage of casting provides a 30% improvement of cooling over conventional extrusion heatsink designs.
8. Sync – These amplifiers have a 6 pin mini DIN connector. When operating two amplifiers in the bridge mode, the SYNC cable must be used. This will allow the two independent frequency carrier generators in each unit to be synchronized.
9. Speaker Terminals – The heavy duty, gold-plated terminal block connectors (+ and –) will accept wire sizes from 8 AWG to 18 AWG. These gold-plated connectors are immune to corrosion that can cause signal deterioration.
10. Power Terminals – The power and ground connectors on the amplifier are gold-plated and will accommodate up to 4 AWG wire maximizing the input current capability of the amplifier.
11. REM Terminal – This terminal is used to remotely turn-on and turn-off the amplifier when +12V DC is applied.
12. RCA Input Jacks – The industry standard RCA jacks provide an easy connection for signal level input. They are gold-plated to resist the signal degradation caused by corrosion.
13. RCA Pass-Thru Jacks – The Pass-Thru provides a convenient source for daisy-chaining an additional amplifier without running an extra set of RCA cables from the front of the vehicle to the rear amplifier location.
14. Punch Bass – The Punch Bass control helps correct for acoustical deficiencies in the listening environment by helping produce full range sound without adding excessive boost.. The Punch Bass control is a narrow band adjustment at 45Hz variable from 0dB to + 18dB. Connection is made with a cable using RJ-45 and can be installed under the dash for remote control access.

Specifications:

• Operational Voltage Range (DC Volts): 10 – 15.5
• Minimum Speaker Impedance: 2Ω (Ohms)
• Typical Current Draw (Music) (Amps): 30A
• Typical Current Draw (Sine Waves) (Amps): 50A
• Recommended Alternator Size (Street Driven Car) (Amps): 50A
• Recommended Alternator Size (Competition Car) (Amps): 100A
• Recommended Power & Ground Wire Size (AWG – American Wire Gauge): 8 Gauge
• Recommended Capacitor Size: 0.5 Farad
• 4Ω Load Mono: 275 Watts x 1
• 2Ω Load Mono: 550 Watts x 1
• Height: 3.175" (8.07cm)
• Width: 11.6" (29.46cm)
• Length: 15.09" (38.33cm)
• Battery Fuse Rating (Amp): 50A AGU Fuse
• Signal-to-Noise Ratio: >90dB A-weighted
• Crossover Slope: 24dB/octave Butterworth
• Crossover Frequency: variable LP (Low Pass) from 40Hz to 250Hz
• Frequency Response: 20Hz to 220Hz ±0.5dB
• Bandwidth: 20Hz to 220Hz ±3dB
• Damping Factor @ 4Ω (at output connector ) : >100
• Acceptable Signal Voltage Range: Variable from 150mV to 5V (RCA Input)
• Protection: High current latch protection. Circuit component tolerances are used for protection.
• Equalization (45Hz Punch Bass): Variable from 0dB to +18dB @ 45Hz
• Input Impedance: 15k ohms

• 3' 2-channel RCA/Interconnect cable
• Dual Copper Braid
• Aluminum Mylar Foil Double Shielding for maximum noise rejection
• Remote Lead Wire
• Single Woven Clear EPDM Jacket for flexibility
• Twisted Pair OFHC Copper Signal Transfer Wire
• Gold Plated Lugs

ShipSound's Description: Because it's a CDT Audio sub, you can expect an awesome, drum-tight smooth sound - and boy does it deliver. But what you may not expect is this subs ability to play amazingly loud - and to do so with complete control and unreal precision.

Experience total audiophile sound, from a subwoofer. CDT's Classic Series subs will surprise you with their gorgeous full-bodied bass impact. Tight, concise bass, perfect tonal balance & authoritative low bass response.

Features:

• Power handling: 400 watts RMS/800 watts Max
• Black Woven Glass Fiber Cone
• Designed for both the audiophile & the SPL user
• NBR Rubber Surround With PLY-C-Spider
• Vaccum Formed Poly Dust Cap
• Red Powder Coating On Stamped Steel Basket
• 2" Dual 4-ohm Voice Coils On Thick Kapton Former W/Braided lead Wire
• Nickel Plated Dual Push Terminals
• Double Stack 100 Oz Motor W/Chrome Magnetic Plates. Rubber Boots for protection
• Xmax: 15mm one-way linear, 30mm peak-to-peak
• Efficiency: 92.3dB @2.83v
• Recommended sealed box volume: 1.0 cu. ft.
• Recommended ported box volume: 1.2 cu. ft.
  

Features:

• 6.5" 2-Way
• Midrange: 6.5"
• Crossover: "Phase Perfect"
• 60dB 2-Way SatNat-456
• Tweeter: 3/4" TW-20 Titanium metal
• Power Handling: 90 watt RMS
• Frequency Response: 60-20kHz
• Sensitivity: 92.0 dB
• Impedance: 4Ohm
• Surface & Flush mount tweeter

Features:

• Amplifier Type: 2-channel
• RMS Power @ 4 Ohms: 100W x 2 @ 14.4V
• THD at 4-Ohm RMS Power: n/a
• Bridged RMS Power @ 4 Ohms: 200W x 1 @ 14.4V
• Preamp Outputs
• Built-In Crossovers: HP/LP
• Bass Boost: 0 - 18 dB
• Frequency Response: 20-20,000 Hz
• Signal to Noise Ratio: > 100 dB
• Fuse Rating: 40 amps
• 100W x 2 (4-1 ohm stereo)
• 200W x 1 (8-2 ohm bridged)
• Tried and true triple Darlington output stage
• Buffered RCA full range thru output
• Remote Monitoring Display (RMD) port
• Low Pass Level control ready (LPL-44)
• Xe.flow: variable thermal feedback controlled fans
• Xe.tune: 24dB Linkwitz-Riley LP/HP/BP filter
• Xe.load: optimized for any impedance load

The looks alone generate plenty of buzz. But it's the patented SPIRALCELL® Technology in OPTIMA RedTop batteries that's truly worthy of praise. OPTIMA RedTop batteries are built to withstand the abuse Trucks, SUV's and 4x4's experience on and off-road. SPIRALCELL Technology immobilizes the internal components of the battery, enabling OPTIMA batteries to withstand incredible amounts of vibration.

Vehicles modified for better engine performance demand more from a battery. OPTIMA batteries withstand the high underhood temperatures associated with these Performance vehicles. The sealed cells make the battery spill-proof, even if you install it on its side! This prevents external gassing and leaking which can damage engine components and limit battery performance.

If your battery is used in vehicles that demand extra reliability and performance, or if you just take pride in getting the best performance out of your vehicle, OPTIMA RedTop batteries deliver the performance you demand.

Inspired by a passion for power and reckless behavior... An OPTIMA RedTop battery is the only battery specifically designed to take abuse. Its patented SPIRALCELL® Technology offers 15 times the vibration resistance and up to twice the life of ordinary batteries. Plus, it's spill-proof, highly resistant to heat and cold, and can be stored for long periods without maintenance. If you like to play hard, OPTIMA is the battery for you. Look for it's colored top and six-pack shape at your local Optima dealer.

More Starting Power... OPTIMA batteries deliver a higher level of power to the starter in the critical first 10 seconds of the vehicle starting cycle.They feature a patented SPIRALCELL Technology allowing for the lowest internal resistance of any battery on the market today. This decreased internal resistance, along with the completely sealed case,is the key to Optima's unparalleled high power delivery, increased cycle life and fast recharge capability for fast recovery in short driving cycles.

Vibration Resistant... With it's patented SPIRALCELL Technology, OPTIMA batteries offer 15 times the vibration resistance and up to twice the life of ordinary batteries.

The OPTIMA® is like no other battery found in today's market. OPTIMA's unique SPIRALCELL design offers the greatest technology in providing a strong and clean power source that far surpasses any of today's filled lead/acid batteries. With OPTIMA under your hood, you can count on a longer lasting battery.

Features:

• Lasts up to 2 times longer than other batteries
• More power in the initial 1, 3, 5, and 10 seconds of the starting process than comparably rated conventional lead acid batteries
• Constant performance quality keeping your battery running at the same level even as it's being discharged
• Ideal for seasonal use. when fully charged: it can sit unused for up to 12 months at room temperature (or below) and still start a car
• 15 times more resistant to vibration than other batteries
• Non-spillable and can mount in almost any position

Specifications:

• Nominal Voltage: 12v
• Cold Cranking Amps (CCA) @ 0°F: 800 amps
• Cranking Amps (MCA or CA) @ 32°F: 1000 amps
• Internal Resistance (ohms): 0.003
• Dimensions: 10" L x 6-7/8" W x 7-13/16" H
• Minimum Weight (lbs): 38.8
• Type Post/Terminal: Dual SAE & GM (SAE / BCI automotive and GM style side terminal (3/8" – 16 UNC – 2B, threaded nut)
• BCI Group Size: 34/78
• Open Circuit Voltage (fully charged): 12.8 volts
• Internal Resistance (fully charged): 0.0030 ohms
• Capacity: 50 Ah (C/20)
• Reserve Capacity: BCI: 110 minutes
• Plate Design: High purity lead-tin alloy. Wound cell configuration utilizing proprietary SPIRALCELL® technology.
• Electrolyte: Sulfuric acid, H2SO4
• Case: Polypropylene
• Color: Case: Dark Gray
• Cover: “OPTIMA“ Red
• NSN (National Stock Number): 6140-01-457-4339
• Part Number: 8004-003
• Former/Old Part Number: 800U

Exonic EXD 7088 Features:

• High Res WVGA Digital Panel
• 6.2” WVGA DIGITAL TFT Panel
• 800x480 Pixel Resolution
• The BEST in LCD Panel Technology
• NEW Graphic Use Interface
• Easy to Navigate New Icons
• Accurate Calibrateable Touch Screen
• Highly Intuitive GUI
• Steering Wheel Control Built-in
• Use factory steering wheel control
• Simple connection & on-screen setup
• Eliminates need for extra parts
• OEM Factory Flush Mount Fit
• Slim Front Panel Design Sit Flush
• No need for major fabrication
• Sleeve and OEM Mouting Included
• USB and Aux-In on Front Panel
• Plays Music, Videos, Pictures
• Simple Plug, Search, and Play
• Front Panel RCA Aux Input
• AM / FM Tuner
• PLL tuner with 18FM/12AM Presets
• 4Ch x 45watt MAX Output
• 4.1 Ch Line Out Front, Rear, Sub
• SD Card Media Slot
• Read Music, Videos, Pictures
• Simple Plug, Search, and Play
• MP3, WMA, JPEG, AVI
• Bluetooth Function
• Bluetooth hands-free phone
• Incoming caller ID display on screen
• On-Screen Controls
• Multimedia Player
• DVD/VCD/CD/MP3/WMA/JPEG
• DVD±R/DVD±RW/CD-R/RW
• Easy Media Search
• Wiring and Setup
• 3 Band EQ with LPF Sub Control
• 2 Video Outputs
• RCA Audio / Video Input

Exonic EXD 7088 Specifications:

• Double DIN 6.2” WVGA Digital TFT Multimedia Unit
• 6.2" WVGA Digital TFT LCD (800x480 pixels)
• Touch Screen Control
• Rotary Volume Control
• Front SD / USB / AUX Input
• Built-in Bluetooth
• DVD / VCD / CD / MP3 / WMA / JPEG Playback
• DVD±R / DVD±RW / CD-R / RW Playback
• 4 Channels x 45W MAX Power Output
• 3-Band EQ
• PLL Tuner with 18FM / 12AM Presets
• 4.1 channels Line-Out : Front, Rear and Subwoofer
• PAL / NTSC / SECAM Compatible
• Dual Video Outputs
• Rearview Camera Input
• Telephone Mute
• Multi Function Remote Control
• ISO Cable Connector
• AV Input
• Steering Wheel Control ready

Interchangeable Color Cover (Black, Grey, Tan)
Matching your OEM interior color is just a snap away. Select the color that best matches your interior and just snap it for a factory finish look. Best of all these snap on color covers are included with each unit so there are no additional parts to buy or order.

Exonic EXM 1100DTV Features and Specifications:

• 11” TFT LCD Ceiling Mount Digital TV
• Wide Screen 16:9 Ratio
• Low Reflection, High Resolution TFT LCD
• Swivel Display
• 350:1 Contrast Ratio
• 400 cd/m2 Brightness Ratio
• On Screen Display
• NTSC / PAL Auto Switching
• Dual Audio & Video Input
• Built-in FM and IR transmitter
• Built-in Dome Lighting
• Multi Function Remote Control
• Interchangeable Color Covers Included
• 12 VDC Operation

• 9” TFT LED Headrest Monitor with Pillow
• Color: Tan
• Universal Headrest Mounting
• Wide Screen 16 : 9 Ratio
• High Resolution TFT LED
• 350 : 1 Contrast Ratio
• 400 cd/m2 Brightness Ratio
• On Screen Display
• NTSC / PAL
• Dual Video Input
• Single Audio Input
• Built-in IR Transmitter
• Aspect Control Mode
• Screen Rotation
• Dimmer Control
• Sleep Timer
• Multi Function Remote Control
• 12V DC Operation

• Rearview Camera with Virtual Overlay Parking Guidelines
• Easy to install Multi-Angle Bracket Mount
• Low Profile High Resoulution Camera
• Selectable Distortion Corection
• Weather Resistant Moisture Proof design
• Wide Viewing Angle
• Super Low Lux Performance
• 720x480 pixels Resolution
• 1/4” CMOS Color Sensor
• 350,000 Pixel Resolution
• Internal Sync System
• 380 TVL Resolution
• 1 LUX Minimum Illumination
• 35dB S/N Ratio
• 1.0 Gamma Correction
• Automatic Gain Control
• 1.0Vp-p Composite Video Out 75 ohm Load
• -40ºC - 85ºC Operation
• Waterproof IP68
• View Angle : 160º D x 133º H x 109º V
• Distortion Correction compensates for Lens Distortion to give a true reverse image
• Bird’s Eye View adjusts images from high mounted cameras to display as if the camera were directly above parking area
• Virtual Overlay Adjustable Parking Guidelines to enhance parking safety and parking ability

• Flip-Down WMA / MP3, CD Receiver with USB, SD / MMC
• CD / MP3 / WMA / CD-R / CD-RW Compatible
• Integrated USB Port
• Integrated SD / MMC Card Slot
• Front AUX Input
• Flip-Down and Detachable Face
• iPod Ready
• MP3 File and Folder Search by Name
• MP3 Track and MP3 Character Search
• MP3 ID3 TAG (Song / Album / Artist Title) Display
• Volume / Bass / Treble / Balance / Fader control
• DSP Sound Effect (Pop / Flat / Classic / Rock)
• Auto Memory Store
• AM / FM Radio Tuner
• 30 Preset Stations (18 FM / 12 AM)
• MOSFET 50W x 4 Audio Output
• 4 channels x 4V Line-Out
• 4V Subwoofer Output
• Multi Function Remote Control